Shopping Cart

Have Questions? Call: 936.588.3333

Hours Of Operation: 10AM – 7PM Mon-Sat (Sundays 11-6)

BIG TEX RANGE & TRAINING CENTER
PRO SHOP PRICING

BERETTA

Model 92/96 (centerfire only) – also works with Taurus PT92 series and some Girsan clones

  • Reduce DA/SA trigger pull by 40%
  • Polish feed ramp
  • $89.99

CANIK

Available for all TP9 series including Elite, SF, V1, etc.

  • Reduce and smooth trigger pull to approximately 3.5#.  DA models also decrease to about 6.5# in DA
  • Tier II service includes new flat-face trigger that eliminates overtravel
  • $54.99 Tier I (keeps OEM trigger with overtravel)
  • $99.99 Tier II (new flat-face short stroke trigger installation)

KAHR

Available for most Kahr pistols in .380, 9mm or .40SW.

  • Reduce trigger to approx 5.5# (stock is 8#) and smooth trigger pull
  • Tier II service includes new flat-face trigger that reduces overtravel by 10%
  • $59.99 Tier I (keeps OEM trigger with overtravel)
  • $129.99 Tier II (new aluminum flat-face trigger)

KEL-TEC

P32, P3AT, PF9

  • Reduce trigger pull by 1.5#….. $59.99

Sub-2000

  • Install flat-face trigger with adjustable pre/post travel…. $79.99

CP33

  • Install flat-face trigger with adjustable pre/post travel and extended safety levers….$99.99

RUGER

LC9 and LC380

  • Short stroke trigger kit, reduces trigger pull length by half, reduces pull weight, DEACTIVATES MAG SAFETY – GUN 

LC9s and EC9s

  • Short stroke trigger kit, flat-faced, reduces trigger pull by 20%, ELIMINATES MAG SAFETY – GUN WILL FIRE WITHOUT MAGAZINE… $89.99

LCP

  • Short stroke flat-faced trigger, eliminates overtravel…. $89.99

LCP II

  • Short stroke flat-faced trigger, removes 25% of pre-travel… $89.99
  • Reliability package for LCPII .22LR…. $49.99

MAX-9

  • Short stroke flat-faced trigger, removes most of pretravel…. $89.99

Security-9

  • Short stroke flat-faced trigger, removes most of pretravel…. $89.99

SAR-USA

SAR-9

  • Short stroke flat-faced trigger, shortens trigger pre/post travel, adjust trigger pull to approx 3.5#…. $89.99

Hammer-Fired Models

  • Reduce trigger pull by approximately 2# DA and SA…. $79.99

SCCY

CPX series (all)

  • Short stroke trigger, reducing trigger pull length by 25%…. $69.99
  • Short stroke hammer upgrade, overall pull length reduced by 50%…. add $60.00

SIG-SAUER

Trigger upgrades for classic P-series pistols average $100-$200 depending on model and type of trigger upgrade (Galloway, Gray Guns, etc)

P320 trigger upgrades $100-$150

P238/P938 upgrade to flat-faced trigger with trigger job average $175

SMITH & WESSON

BG380

  • Reduce length of pull and reset, increase reliability on primer strikes…. $149.99

Sigma/SD Series

  • Reduce length of pull and reset, decrease trigger pull to 4.5-5#…. $99.99

Shield and Shield 2.0

  • Install Apex kit, reduce trigger pull weight and travel…. $169.00

M&P Series

  • Install Apex kit, reduce trigger pull weight and travel…. $169 and up

J-Frame Revolver

  • Action job…. $69.00

K/L/N Frame Revolver

  • Action Job….  $89.00

SPRINGFIELD ARMORY

XDS

  • Reduce trigger pull overtravel and pull weight… $99.99

XD/XDM

  • Powder River kit, reduces pre/post travel and pull weight… $149 and up

TAURUS

Millennium G2, PT111 G2, G2C, G2S, G3, G3C

  • Reduce pre/post travel….  $79.99

Most metal-frame revolvers

  • Reduce trigger pull…. $69.00

1911

MOST models

  • Reduce pull weight, crisp break…..  $100.00

IWI – TAVOR

TAVOR X95/SAR Right-to-Left Conversion $149.99

  • Includes new LH bolt, properly headspaced and new barrel wrench
  • Test-fired per IWI specification

TAVOR X95/SAR Trigger Work

  • Geissele Lightning Bow Trigger Installation POR
  • Geissele Super Sabra Trigger Pack Installation POR

We can do most work to the X95/SAR series of firearms including Right-to-Left on 9mm kits, caliber conversions, etc.  Price on request.

*** NOTE:  Right-to-Left conversions on IWI TS-12 shotguns can ONLY be done at IWI US in Middletown, PA. ***

BARREL THREADING

Most rifles   $125, any thread pitch 

AR15 PLATFORM

Complete upper build assembly, labor only $75.00
Complete lower build assembly, lower only $50.00
Pin-and-Weld $65.00

We can perform any repair or custom work, including complete builds to your specification.

GENERAL GUN WORK

We perform all types of general gun repair and cleaning including repair on obsolete firearms.  

We typically do not work on muzzle-loading firearms.

GENERAL INFORMATION

Federal law allows you to ship your firearm directly to us for work and we can return it directly back to you.  There are some considerations and requirements, so please contact us first and we can help make it hassle-free.

Depends on what we are doing. Most general gun work, including X95/Tavor conversions, only take 3-5 days in the shop and sometimes less. Barrel threading or other machine work might take up to two weeks in shop. We will stay in communication so you won’t be wondering what’s going on.

Probably not. We require incoming firearms to have ATF-compliant markings including a serial number. If your home-build gun doesn’t have that, we can’t receive it.

Yes. We are a fully licensed manufacturer with the correct SOT. You must contact us in advance so we can go over the federal requirements.